Do I need to wash my new cookware before using it?
Yes!
Before using your new cookware for the first time, be sure to wash it
thoroughly. Add 1/4 cup of vinegar to hot soapy water, and with a
sponge or dishcloth wash each piece. This will remove any manufacturing
oils or polishing compounds that may still remain on the cookware.
Cookware can discolor or stain if it is not washed properly before
using it for the first time. This could be considered improper use and
void the warranty.
What is the best way to clean my cookware after cooking?
Clean
cookware well after each use once it has cooled completely. Use hot
water with a mild dish- soap and a sponge or dishcloth to remove all
food residue. Cookware can discolor or stain if it is not properly
cleaned before cooking again. This could be considered improper use and
void the warranty. The cookware is dishwasher safe.
What is the right temperature setting for my stove?
A
low to medium temperature is best. A high temperature may be used when
necessary, such as when boiling liquids. Always use a burner that is
similar in diameter to the pan you are using. If cooking on a gas
stove, do not allow the flame to extend up the sides of the pan.
How do I remove the water spots on my cookware?
Water
spots may occur due to the water condition in the area that you live
in. To prevent them, after washing always rinse cookware with hot water
and dry immediately. If water spots appear, sprinkle a non-abrasive
stainless steel cleanser, such as the Bar Keeper’s Friend, onto the dry
cookware and with a moistened paper towel, rub in a circular motion.
Once the stain is removed, wash pan in hot, soapy water and dry.
Why has my pan turned blue?
Overheating
or allowing a pan to boil dry will cause bronze, blue or rainbow tints
on the stainless steel surface. The tints are harmless but can be
removed by using a non-abrasive stainless steel cleanser, such as the
Bar Keeper’s Friend. Sprinkle the cleanser onto the dry cookware and
with a moistened paper towel, rub in a circular motion. Once the stain
is removed, wash pan in hot, soapy water and dry.
Why does my pan have a white film on it?
Minerals
in water or starches in food can leave a white film on stainless steel.
These will not affect the cookware’s performance but can be removed by
rubbing the area with a sponge that has been dipped in lemon juice or
vinegar.
Why does my pan have white spots on it?
Undissolved salt can leave white spots or pits at the bottom of your cookware. These pits do not affect the cookware’s performance but cannot be removed.
How do I remove burned-on grease?
Avoid scraping the pan
or using metal scouring pads. Fill pan half full with water, place on
the stove and bring to a boil for a few minutes. Allow water to cool
and wash the pan as normal. For severe burns you may use a spray-on
cleanser, such as Easy-Off®. Spray liberally, let sit overnight and by
morning the burned-on food should come off easily.
Can I use my cookware in the microwave or in a broiler unit?
No! Never use your cookware in the microwave or in a broiler unit.
Can I use my cookware in the oven?
Yes!
Be sure to preheat the oven completely before placing cookware inside
the oven and never use a temperature higher than 400°F/204°C for 9ply
and 5ply cookware, or 350°F/176°C for 7ply cookware. Also, be sure to
use oven mitts when inserting or removing cookware from the oven.
Does it matter what size pan or cover I use?
Yes!
Choose a pan size that is appropriate for the amount of food you are
preparing; ideally, you should fill the pan 2/3 full. Always use the
cover that is intended for the specific pan you are using.
Why is my cookware handle loose?
Your
cookware features screw-on handles, which allows the cookware to have a
smooth interior with no rivet heads or weld marks. Over time, the
handles may loosen but can easily be tight- ened (tool requirement:
screwdriver or 14mm socket wrench). If the handle is damaged, do not
use it and contact the warranty service department at 1-800-279-3373
for a replacement.
Can I store food in my cookware?
No!
Storing food in surgical stainless steel cookware for long periods of
time may cause staining or pitting due to the salts, fats, seasonings,
and acids in the food.
Why can’t I get my cover off of my cookware?
After
cooking, there may be a tight water seal between the pan and cover. Do
not pry off lid. Simply open the Redi-TempTM valve to equalize pressure
and the cover can then be removed easily. Always tilt the cover away
from you to avoid steam burns.
Why do my meats not brown properly?
The
cookware may not be preheated correctly. Always preheat cookware 3-4
minutes at a medium temperature. Add a few drops of water to the pan.
The drops should bounce and sizzle when the correct temperature has
been met. If they immediately disappear, this is a sign that the
cookware is too warm and it should be cooled. Once meat is added to the
pan, do not attempt to turn it until the food releases itself.
Why are there scratches on my cookware?
Stainless
steel can scratch if handled incorrectly. Scratches do not affect the
cookware performance, and therefore are not considered defects in
workmanship or material. To avoid scratches: (1) Knives or sharp
kitchen tools should not be used for cutting, stirring, or serving
foods. (2) Do not use an electric mixer in your cookware. (3) Always
stack cookware carefully.
No comments:
Post a Comment